Product Gallery

Engraved School Leavers Bench

From: £899.00

    Reset options

    Standard or Premium or Curved Crest Top Bench

    Slat Engraving

    Please type names for each slat here

    Slat Engraving

    Please type names for each slat here

    Slat Engraving

    Please type names for each slat hereSlat Engraving

    Ground Anchors


Be the first to review “Engraved School Leavers Bench”

There are no reviews yet.

Finish: Untreated or Superior Danish Oil

Aftercare: Product maintenance is very important. Teak is a wonderful naturally oily timber. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.

Danish Oil: If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.

About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.

Our Teak: All our products are made of FLEGT-licensed teak sourced from Indonesia. LEGT-licensed timber is considered to fully comply with the EU Timber Regulation (EUTR)

If you need any help or advise on how to maintain your product please contact us or consult your care guide.

Design & Made: Made to order in the UK

Materials: Made from Solid Teak


2 Seater – 94cm tall x 69cm deep x 1.2 metres wide

3 Seater – 94cm tall x 69cm deep x 1.5 metres wide

4 Seater – 94cm tall x 69cm deep x 1.8 metres wide

All benches come fully assembled. Benches are delivered on a pallet. Please make sure before ordering you have appropriate access. Please contact us if you have any special requirements.

2 Seater – 94cm tall x 69cm deep x 1.2 metres wide

3 Seater – 94cm tall x 69cm deep x 1.5 metres wide

4 Seater – 94cm tall x 69cm deep x 1.8 metres wide

Product Gallery

Product Description: Engraved School Leavers Bench

Our engraved school leavers bench

When it comes to the end of the school year we are always asked by parents who are looking to club together and buy a leavers gift., One of the most popular commissions is our engraved school leavers bench. This is lasting statement, sat in pride of place at the school showing the children’s names.

If you look at it if 30 parents contribute then that’s around £29 per child to leave a bench that will be remembered for many many years to come, so a very long-lasting practical gift to the school and teachers who have looked after your children through the years.

We have included in the price of the bench engraving across the upright slats making up the bench back rest. Depending on the size of bench you choose, we can offer a single name or two names to be engraved down each slat upright.



Seat Configuration:

Our new engraved school benches are available in 3 standard sizes, a 2 seater, a 3 seater and a 4 seater configuration.

Standard, Premium or Curved Crest Top Bench 

We offer three versions of our benches, Standard and Premium with a curved top rail. Premium is the much heavier-duty version. The solid Teak bench frame is a lot chunkier and more solid however it does reduce the amount of upright making up the backrest. The curved top is ideal for those who want an engraved logo or carved crest on the bench. Please see our example images in our product gallery.

The Curved Crest Top Bench will include a carved logo, however this is based on a basic logo with good quality artwork being supplied. Some logos can be very complicated to carve which may add to the cost of the bench. Please do contact us with your logo when or before placing an order.

Number of upright Slats:

Standard Bench

2 Seater – 13 slats

3 Seater – 17 slats

4 Seater –  21 slats

Premium and Curved Crest Top Bench

2 Seater – 11 slats

3 Seater – 15 slats

4 Seater –  19 slats


Our Teak benches come without any finish as standard. Teak is a naturally oily timber and is perfectly suited for outdoor conditions. Your bench will fade to a pale silver colour in time if left untreated. You do have the option, if you so desire, to have your traditional bench finished in Superior Grade Danish Oil.


Coloured fitted cushion covers can be added to your bench order. An outdoor bench seat cushion is the perfect accessory for any timber bench, making it more comfortable and will finish off your bench nicely. Available in a range of colours.

Bench Security Ground Anchors:

If you are concerned about the security of your bench and want to protect your wooden school garden bench from opportunistic thieves and vandals we can supply quick and easy-to-install ground anchor fixing kits for both hard and soft ground.

Crafted from rust-proof galvanised steel, our ground anchors will provide an extra level of garden furniture security.

Dimensions of Benches:

2 Seater: 94cm tall x 69cm deep x 1.2 metres wide – Up to 50 characters on the top rail and/or the knee bar

3 Seater: 94cm tall x 69cm deep x 1.5 metres wide – Up to 70 characters on the top rail and/or the knee bar

4 Seater: 94cm tall x 69cm deep x 1.8 metres wide – Up to 100 characters on the top rail and/or the knee bar

Price includes engraving on all slates across the backrest of the bench.

Estimated Delivery Time For Engraved School Benches:

10 – 21 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.

Please Note: 

All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate.

Bespoke Engraving:

If you are looking to include extra lettering, lots of names for example for school leavers tribute. Well, we can carve names along the slats of the bench, on the back uprights as well as the bench seat slats. Please contact us for a quotation. All benches are delivered on a pallet. Please make sure before ordering you have the appropriate access.

Read more
Engraving Trigger

Personalised Engraving

Across our range

International Delivery

Delivery charges may apply

Live Chat Support

Fast service support

Lets stay in touch

Sign up for our newsletter