Round Oak Bollards

From: £250.00

Estimated Delivery Time: 7-10 Working Days

    Reset options

Reviews

Be the first to review “Round Oak Bollards”

There are no reviews yet.

Finish: Untreated, Superior Danish Oil or Diamond Coating

Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.

Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.

Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.

About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.

Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.

If you need any help or advise on how to maintain your product please contact us or consult your care guide.

Design & Made: Handmade to order in the UK

Material: Made from solid English Oak

Dimensions:

Diameter — 10cm

Height — 1Metres – 1.5Metres

Dimensions:

Diameter — 10cm

Height — 1Metres – 1.5Metres

Product Description: Round Oak Bollards

Our fantastic solid oak bollards. Handmade from a 10cm diameter beautiful English Oak.

Hand-turned by our skilled woodturners, these solid oak bollard posts are striking in very way. Our solid round oak bollards come in two standard sizes and include three perfectly carved rings which can be paint fulled with a colour of your choice.

Ring Colours – Red, White or Black

We would like to stress, these are made from Air Dried Oak and not Green Oak. The reason why this is so important is that green oak is cut straight from the tree soon after it is felled and has not been dried in any way. This will over time dry out even in outdoor conditions and will move, split and crack as it dries and becomes accustomed to its surroundings. ‘Air Dried’ oak is as it states. It has been left to dry out for several years and has acclimatised and settled into its surroundings, meaning any movement or splitting has already occurred and can be removed leaving a flawless finish. This means your beautiful wooden house signpost is already perfectly accustomed to outdoor conditions.

Finish:

As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each engraved oak signpost is handmade from one piece of Air Dried Superior Grade English Oak. You can choose to leave your signpost untreated, finished in Superior Danish Oil or our low-maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timber’s natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot more harder wearing and only requires a top-up once a year, however this depends on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top-up kits can be ordered over the phone or on our website – see here. 

Setting your Round Oak Post into the Ground:

We recommend you set your round oak post in concrete to make sure it is properly secure. You can purchase small bags of ready-mixed concrete to fix the post in the ground yourself or contact a local specialist. We recommend you set a minimum of 30cm into the ground.

Personalise your Oak Signpost:

Engraving can be added for an additional charge. Extra carvings like arrows or motifs, please contact us for a quotation.

Dimensions:

Half Size: 10cm x diameter x 1 Metres (4” x 4” x 39.5”)

Full Size: 10cm x 10cm x 2 Metres (4” x 4” x 59”)

Estimated Delivery Time:

7-10 working days once we have received your order. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.

Please Note:

All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate. All signs are made to order.

Read more
Engraving Trigger

Personalised Engraving

Across our range

International Delivery

Delivery charges may apply

Live Chat Support

Fast service support

Lets stay in touch

Sign up for our newsletter