From: £1,099.00
Estimated Delivery Time: 3 - 4 Weeks
Finish: Untreated, Superior Danish Oil or Diamond Coating
Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.
Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.
Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.
About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.
Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.
If you need any help or advise on how to maintain your product please contact us or consult your care guide.
Design & Made: Handmade to order in the UK
Materials: Made from Solid English Oak
Single Bay Notice Board – 4 x A4 / 6 x A4
Double Bay Notice Board – 8 x A4 / 12 x A4
Triple Bay Notice Board – 12 x A4 / 18 x A4
Four Bay Notice Board – 16 x A4 / 24 x A4
Notice board thickness – 7.5cm
Bay Height (internally) – 70cm (2 A4 tall) – 100cm (3 A4 tall)
Bay Width (internally) – 50cm (2 x A4 wide) – 70cm (3 A4 wide)
Posts – 8xm x 8cm x 250cm (100cm attached to the notice board – 100cm additional free standing post – 500mm below ground for fixing with concrete)
Single Bay Notice Board – 4 x A4 / 6 x A4
Double Bay Notice Board – 8 x A4 / 12 x A4
Triple Bay Notice Board – 12 x A4 / 18 x A4
Four Bay Notice Board – 16 x A4 / 24 x A4
Notice board thickness – 7.5cm
Bay Height (internally) – 70cm (2 A4 tall) – 100cm (3 A4 tall)
Bay Width (internally) – 50cm (2 x A4 wide) – 70cm (3 A4 wide)
Posts – 8xm x 8cm x 250cm (100cm attached to the notice board – 100cm additional free standing post – 500mm below ground for fixing with concrete)
Our Freestanding Bespoke Oak Premium Public External Notice Boards are a thing of beauty.
We proudly show off our new range of oak lockable external public notice boards. These beautiful handmade solid oak external notice boards are of the finest quality, handcrafted with great care and attention to detail. You will not find an outdoor wooden noticeboard made with such a heavy-duty external frame. We use air-dried English oak, which is ready to be placed and requires minimal aftercare.
Our oak outdoor notice boards include 4mm thick toughened glass glazed lockable doors, a steel magnetic backboard which can be finished in the colour of your choice and rail run-off strips around the doors.
If you are looking for a wall mounted notice board – click here
These stunning wooden notice boards come fitted with premium quality solid oak posts, fully fitted to the notice board as part of the structure, making the overall notice board very secure and long-lasting. All of our external free standing notice boards come fully assembled and ready to use.
Unlike traditional public notice boards which would contain a cork or fabric pin board inside the bays which over time can become susceptible to dampness and rot, ours feature a vinyl-covered steel backboard. This not only means the notice board is more sturdy and long-lasting but more importantly your public notices announcements with magnets instead of traditional drawing pins. The back bar will never wear out.
Another great feature about our magnetic back panel is you are able to choose from a variety of colours. Please just let us know what colour you want.
All our external oak notice boards all come with glazed lockable solid oak doors. We use quality 4mm thick toughened glass for safety and security. The oak doors are fitted with Grade 14 external concealed bearing hinges, performance tested to 200,000 cycles. The locks are unobtrusive, simple and elegant. A larger bay for 6 x A4 paper announcements will have 2 locks per door.
These stunning oak notice boards are available blank or can be personalised with your choice of words or lettering. Choose to have carved engraving on the top or bottom rail or both – up to 100 characters on each. The top rail can be curved to allow for extra engraving for bespoke carved logos or motifs, perfect for council crests and coats of arms – please contact us directly about additional carving.
As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each oak sign is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your sign untreated, finished in Superior Danish Oil or our low-maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timber’s natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot harder wearing and only requires a top-up once a year, however, this depends on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top-up kits can be ordered over the phone or on our website – see here.
Single Bay Notice Board – 4 x A4 / 6 x A4
Double Bay Notice Board – 8 x A4 / 12 x A4
Triple Bay Notice Board – 12 x A4 / 18 x A4
Four Bay Notice Board – 16 x A4 / 24 x A4
Notice board thickness – 7.5cm
Bay Height (internally) – 70cm (2 A4 tall) – 100cm (3 A4 tall)
Bay Width (internally) – 50cm (2 x A4 wide) – 70cm (3 A4 wide)
Posts – 8xm x 8cm x 250cm (100cm attached to the notice board – 100cm additional free-standing post – 500mm below ground for fixing with concrete)
3 – 4 weeks. Please be aware this can change daily. If you require an item to be made by a specific date please get in touch with us.
All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate. All our engraved wooden pinboards come with brass wall plate fittings.
Bespoke Notice Boards:
If you like the look of our personalised wooden notice Boards but would like them larger or smaller or you have a particular area you want to fill, we can offer bespoke-sized external Notice Boards made to your specifications. Please contact us for a quotation.
Across our range
Delivery charges may apply
Fast service support
Reviews
There are no reviews yet.