From: £89.00
Estimated Delivery Time: 7-10 Working Days
You must be logged in to post a review.
Finish: Untreated, Superior Danish Oil or Diamond Coating
Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.
Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.
Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.
About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.
About Live Edge: The natural live edge will include no bark. It is all removed at the sawmill or by us at the production stage. Bark will contain worm and other small insects that is why it is taken away. The remaining edge will show evidence of natural activity of woodworm and holes in the live edge and surrounding area. These will be filled by us during production using wood coloured wax. Any splits found in the board during manufacture will also be filled by us.
Live edges are very soft compared to the heart wood of the timber board. It is very porous and will weather a lot faster in outdoor conditions. Regular oiling and Diamond Coating will need to be added to stop it from weathering. It is a difficult part of the timber board to seal. Please bear this in mind when ordering our live edge signs.
Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.
If you need any help or advise on how to maintain your product please contact us or consult your care guide.
Design & Made: Handmade to order in the UK
Material: Made from solid English Oak
Dimensions:
Small – Text on 1 line – 2.5cm x 15cm x 30cm – 50cm
Small – Text over 2 lines – 2.5cm x 25cm x 30 – 50cm
Large – Text over 1 line – 2.5 x 15cm x 50cm – 1Meter
Large – Text over 2 lines – 2.5cm x 25cm x 50cm – 1Meter
Small – Text on 1 line – 2.5cm x 15cm x 30cm – 50cm
Small – Text over 2 lines – 2.5cm x 25cm x 30 – 50cm
Large – Text over 1 line – 2.5 x 15cm x 50cm – 1Meter
Large – Text over 2 lines – 2.5cm x 25cm x 50cm – 1Meter
Natural Edge Rustic Wooden House Signs, beautifully made in the UK.
Rustic, organic and natural, these handmade heavy duty rustic wooden house signs are created by hand, from scratch, using hand selected Superior Grade English Oak and made to considerable thickness. We handcraft each one to order in our Hampshire workshop, choosing the best pieces from our stock to make these beautiful wooden signs. Each one is exquisite and unique.
Our rustic wooden house signs are made from a solid single piece of English Oak and feature the natural Waney Edge of the tree, also known as the live edge, give these rustic signs a truly raw feel. The shape of the live edge will vary in height across the signs length. It will not be uniform and generally has a 45 degree slope.
The length of the house signs will vary due to the amount of lettering that is required. We will always allow plenty of room either side of your lettering to give your house sign a well proportioned look.
Concerning Bark:
Our Live Edge oak signs will feature no bark along the live edge, just simply the natural edge with the bark removed. For two reasons, firstly because the bark is were insects and worms live, the other reason is because the bark does tends to fall off in the end.
We make these stunning rustic live edge house signs are available in either small or large size signs giving you the flexibility of having your engraving on one line or over 2 lines. Please see the dimensions below and images:
Your can choose to have your sign made in two thicknesses – 2.5cm thick and 4.5cm thick depending on how chunky you want the sign to look. Both signs are made from a single piece of English Oak. It’s all down to the appearance you want.
As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each engraved oak sign is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your sign untreated, finished in Superior Danish Oil or our low maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timbers natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot more harder wearing and only requires a top up once a year, however this depend on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top up kits can be ordered over the phone or on our website – see here.
Our rustic wood house signs come with our invisible screw head fixings, so no screws or fittings on display.
Small – Text on 1 line – 2.5cm x 15cm x 30cm up to 50cm (1” x 4” x 12” up to 20”) ~ up to 10 characters
Small – Text over 2 lines – 2.5cm x 25cm x 30 up to 50cm (1” x 8” x 12 up to 20”) ~ up to 20 characters
Large – Text over 1 line – 2.5 x 15cm x 50cm up to 1Metre (1” x 4” x 20” up to 40”) ~ up to 30 characters
Large – Text over 2 lines – 2.5cm x 25cm x 50cm up to 1Metre (1” x 8” x 20” up to 40”) ~ up to 30 characters
We can always bespoke make house signs to suit you specific needs. We can make these in any size from a signal number to a house name or even a commemorative plaque.
7-10 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.
All signs are made to order. All engravings are in capitals, for lower case lettering, this can be requested at time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate.
Across our range
Delivery charges may apply
Fast service support
Most products are available to be made and personalised for you in time for Christmas delivery, if you have any questions please phone or message us.
Graham –
The sign arrived yesterday
We really like it
Graham
Client Review –
Good morning Ben
Thank you so much – we received the plaque late yesterday afternoon – we are delighted with it and although it’s not even been put up in position yet, a number of people have commented on how lovely it is!
All best and again, many thanks
Noelle
Ben Griffiths –
Morning
The sign arrived yesterday.
Many thanks, it looks excellent 😊
Regards
Ray