Product Gallery

Printed Vinyl Signs on Posts

From: £269.00

    Reset options

    Upload Artwork

    • (max file size 50 MB)

    Post Length

    This is the amount of post from below the sign plaque. Not the total length. (Please ensure you factor in length to go into the ground) 

Reviews

Be the first to review “Printed Vinyl Signs on Posts”

There are no reviews yet.

Finish: Untreated, Superior Danish Oil or Diamond Coating

Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.

Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.

Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.

About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.

Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.

Our slate signs are finished with a protective layer of iron wax for a hard wearing, long lasting, quality finish.

If you need any help or advise on how to maintain your product please contact us or consult your care guide.

Design & Made: Handmade to order in the UK

Material: Printed Vinyl

Dimensions:

Small – 15cm x 50-100cm

Medium – 30cm x 50-100cm

Large – 45cm x 60-100cm

Oak Posts – 5cm x 5cm x 60cm – 1.2 metres below the sign plaque

All our printed signs come fully assembled ready for placing.

Small – 15cm x 50-100cm

Medium – 30cm x 50-100cm

Large – 45cm x 60-100cm

Oak Posts – 5cm x 5cm x 60cm-1.2metres below the sign plaque

Product Gallery

Product Description: Printed Vinyl Signs on Posts

Our free-standing printed vinyl signs on posts the posts are solid Oak.

Our new range of printed vinyl signs is something special! The most impressive part is the combination of printed vinyl signs and our beautifully handmade oak posts and frame, making the overall finish of our signs eye-catching and extremely sturdy. We use English oak sourced only 20 miles from our Hampshire workshop. We then fix our printed signs into the timber using traditional joinery techniques, not to mention precision and attention to detail.

Printed Vinyl Signs:

The same hard-wearing material used on vans and shop signs – Vinyl is waterproof and will last for years without any maintenance. What’s wonderful is you can have lettering as well as logos, coloured artwork, and tiny and layered detail, which working with timber alone can’t be achieved. All you have to do is upload your artwork when ordering your sign, or email it to us after your order has been placed. We will require Hi-Res good quality artwork in order to print the sign.

SIGN SIZES:

We supply these handcrafted printed signs in a range of standard sizes. The sign plaques range from 15cm high – up to – 60cm high. The width of the sign will range from 50cm – up to – 100cm depending on your artwork and lettering. See our sign dimensions below:

We can also make bespoke size signs to suit your specific requirements. All our signs are handmade in the UK so please feel free to ask if you want something a little different than standard.

WITH OR WITHOUT AN OAK FRAME:

When ordering your free-standing business sign you have the option of having the sign plaque mounted between 2 oak posts at either end, or with an oak frame set at the top and bottom of the sign plaque. The frame provides extra stability whilst enhancing the look of the sign.

POST LENGTH:

Each sign comes with 60cm of oak post protruding below the printed sign plaque. However, you can choose to increase the length of the posts to change the height of your sign, giving you the option of having your sign close to the ground or plenty of clearance should you need it – to be above a wall or hedge for example. When it comes to placing your sign, if you are not using any post-ground fixings then you must allow for the additional length of the post to go into the ground. We recommend a minimum of 25cm for the Small and Medium to go into the ground, 30-40cm for the Large. We would also recommend filling it with concrete for stability and security reasons.

TIMBER FINISHES:

As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each oak sign is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your sign untreated, finished in Superior Danish Oil or our low-maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timber’s natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot harder wearing and only requires a top-up once a year, however, this depends on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top up kits can be ordered over the phone or on our website – see here. 

Dimensions:

Small – 15cm x 50-100cm

Medium – 30cm x 50-100cm

Large – 45cm x 60-100cm

Oak Posts – 5cm x 5cm x 60cm-1.2metres below the sign plaque

Estimated Delivery Time:

10 – 14 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.

Bespoke Sizes:

We can always make bespoke printed signs to suit your specific needs if you are wanting something a little different.

Please Note: 

All our printed signs on posts are made to order. All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate.

Read more
Engraving Trigger

Personalised Engraving

Across our range

International Delivery

Delivery charges may apply

Live Chat Support

Fast service support

Lets stay in touch

Sign up for our newsletter