From: £299.00
Estimated Delivery Time: 7-10 Working Days
Finish: Untreated, Superior Danish Oil or Diamond Coating
Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.
Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.
Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.
About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.
Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.
If you need any help or advise on how to maintain your product please contact us or consult your care guide.
Design & Made: Handmade to order in the UK
Material: Made from solid English Oak
Dimensions:
Small Sign, 1 post — 3.5cm thick x 15cm tall x up to 50 wide
Small Sign, 2 posts — 3.5cm thick x 15cm tall x 50 – 100cm wide
Large Sign on, 1 post — 3.5cm thick x 25cm tall x up to 50cm wide
Large Sign, 2 posts — 3.5cm thick x 25cm tall x 50 – 100cm wide
Posts — 8cm x 8cm x 60cm – 1.2Metres
All signs come fully assembled or flat packed.
Small Sign, 1 post — 3.5cm thick x 15cm tall x up to 50 wide
Small Sign, 2 posts — 3.5cm thick x 15cm tall x 50 – 100cm wide
Large Sign on, 1 post — 3.5cm thick x 25cm tall x up to 50cm wide
Large Sign, 2 posts — 3.5cm thick x 25cm tall x 50 – 100cm wide
Posts — 8cm x 8cm x 60cm – 1.2Metres
Thicker and stronger for stability and long life, this premium free-standing house sign with an arrow is something special indeed.
This is our luxurious handmade heavy duty wooden house sign with pointing arrow. They are created from hand-selected Superior Grade English Oak and made to considerable thickness. We spare no expense when it comes to these beautiful wooden signs.
If you want something that is of superior quality, made with exceptional attention to detail, to a truly stunning flawless finish, you will not be disappointed. These really are the finest and mightiest wooden house signs available on the market. All our standing house signs come already assembled, using traditional joinery techniques, making them extremely hardwearing. There is nothing to do to the sign except get it in the ground.
We offer two sizes in our standard house sign range. Our Small – 15cm tall and our Large sign – 25cm tall, allowing you to either have your house name engraved on one or two lines depending on how you want your house sign to look. The length of the sign plaque will vary due to the amount of lettering that is required. We will always allow plenty of room either side of your lettering to give your house sign a well-proportioned look. All of our sign plaques are 3.5cm thick and feature deeply carved lettering – Please see the dimensions below:
You can choose either a single post or two oak posts to have your sign mounted. The sizes of the posts are 8cm square by the length you choose, giving you the option of having your sign close to the ground or plenty of clearance should you need it – to be above a wall or hedge for example.
Choose a post length of – 60cm tall or 1.2 metres tall. These posts sizes are the total height, include what you will need to put into the ground and also the area where the sign is mounted.
All prices given will include engraving. You can then choose to leave the lettering plain or have it paint filled. We offer White, Black and Grey. The paint application we supply is three coats of water-resistant acrylic paint, giving plenty of protection for the years to come.
As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each oak sign is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your sign untreated, finished in Superior Danish Oil or our low maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timbers natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot more harder wearing and only requires a top up once a year, however this depend on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top up kits can be ordered over the phone or on our website – see here.
You can choose to have your free standing house sign fully assembled ready to place or flat packed. Fitting the sign to the post is a very simple process requiring only a couple of bolts. Choosing your Sign unassembled means you will also save on postage as the parcel is far less bulky.
When it come to place your sign, we recommend you place 20 – 40cm into the ground and fill with concrete for stability and security reasons.
3.5cm thick x 20cm tall x 50cm wide (1.5” x 8” x 20”) ~ up to 20 characters
3.5cm thick x 20cm tall x from 50cm up to 1Metre wide (1.5” x 8” x 20 up to 40”) ~ up to 20 characters
3.5cm thick x 25cm tall x 50cm wide (1.5” x 10” x 20”) ~ up to 30 characters over two rows
3.5cm thick x 25cm tall x 50cm up to 1Metre wide (1.5” x 10” x 20” up to 40”) ~ up to 30 characters over two rows
We can always bespoke make house signs to suit you specific needs. We can make these in any size and shape, from a single number to a house name or even a multiple tier sign for several property names.
7-10 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.
All our oak signs are made to order. All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate.
Across our range
Delivery charges may apply
Fast service support
Reviews
There are no reviews yet.