(1 customer review)

Personalised Wooden Gate Signs

From: £39.00

    Reset options

1 review for Personalised Wooden Gate Signs

Add a review
  1. Kate

    Hello
    Many thanks for arranging the item so quickly and efficiently and for the great customer service.
    Recipient of gift was very pleased too
    Best wishes
    Kate

Finish: Untreated, Superior Danish Oil or Diamond Coating

Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.

Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.

Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.

About Timber: Natural timber is always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.

Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.

If you need any help or advise on how to maintain your product please contact us or consult your care guide.

Design & Made: Handmade to order in the UK

Material: Made from solid English Oak

Dimensions:

Small – Text on 1 line – 2cm x 6cm x 30cm

Large – Text on 1 line –  2cm x 6cm x 50cm

Additional info: All signs come with or without screw holes.

Small – 2cm x 6cm x 30cm

Large – 2cm x 6cm x 50cm

Product Description: Personalised Wooden Gate Signs

If you need a solid oak sign adding to your 5 bar farm gate or garden gate we have created a sign made to fit.

Most cross bars for wooden gates are between 6cm and 8cm. We have design these signs to fit perfect. Of course, if you need it adjusting slightly we can do that for you. Deeply carved engraving is included in the cost of the sign, you will notice from the images the depth are lettering is cut. These oak signs are not engraved by laser or etched, we carve our lettering deep and V-shape to make your house name really stand out.

Sizes:

These personalised carved wooden farm gate signs are made from a single piece of solid English oak. Please see the dimensions below:

Finish:

As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each oak sign is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your sign untreated, finished in Superior Danish Oil or our low maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timbers natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot more harder wearing and only requires a top up once a year, however this depend on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top up kits can be ordered over the phone or on our website – see here. 

Fittings:

All our personalised gate signs come fitted with with or without screw holes. Just choose what you would prefer from the options list.

Dimensions:

Small – 2cm x 6cm x 30cm  (1” x 4” x 12”) ~ up to 20 characters

Large – 2cm x 6cm x 50cm  (1” x 4” x 20”) ~ up to 40 characters

Bespoke Sizes:

As all our signs are made to order it is very easy for us to make signs to required dimensions. We offer a completely bespoke service on all our personalised wooden gifts. So if you need something made to a specific size or style, we can make this for you. That also includes different fonts, carved crest or logos, motifs and symbols.

Estimated Delivery Time:

7 – 10 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.

Please Note:

All wooden gate sign engravings are in capitals unless otherwise stated. For lower case lettering, this will need to be requested at point of order. All sizes are approximate. All signs are made to order.

Read more
Engraving Trigger

Personalised Engraving

Across our range

International Delivery

Delivery charges may apply

Live Chat Support

Fast service support

Lets stay in touch

Sign up for our newsletter