(1 customer review)

Free Standing House Signs with Arrow

From: £199.00

    Reset options

    Top Line

    Bottom Line

    Top Line 

    Bottom Line 

    Post Length

    Post Length

1 review for Free Standing House Signs with Arrow

Add a review
  1. Lorna (verified owner)

    Hey there Davina

    Just to let you know the sign arrived this afternoon and it looks fab. Now I just need to find a bloke with a pick axe to dig it in…!

    Thank you so much once again!

    With kindest regards

    Lorna

Finish: Untreated, Superior Danish Oil or Diamond Coating

Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.

Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.

Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.

About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.

Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.

If you need any help or advise on how to maintain your product please contact us or consult your care guide.

Design & Made: Handmade to order in the UK

Material: Made from solid English Oak

Dimensions:

Small Sign, 1 post — 2.5cm thick x 10cm tall x 50cm wide

Small Sign, 2 posts — 2.5cm thick x 10cm tall x 50cm – 1Metre wide

Large Sign, 1 post — 2.5cm thick x 20cm tall x 50cm

Large Sign, 2 posts — 2.5cm thick x 20cm tall x 50cm up to 1Metre wide

Post — 5cm x 5cm x 60cm-1.2Metres

All signs come fully assembled or flat packed.

Small Sign, 1 post — 2.5cm thick x 10cm tall x 50cm wide

Small Sign, 2 posts — 2.5cm thick x 10cm tall x 50cm – 1Metre wide

Large Sign, 1 post — 2.5cm thick x 20cm tall x 50cm

Large Sign, 2 posts — 2.5cm thick x 20cm tall x 50cm up to 1Metre wide

Post — 5cm x 5cm x 60cm-1.2Metres

Product Description: Free Standing House Signs with Arrow

Our free standing engraved oak signs with carved arrow

If you are looking for a good quality engraved wooden house sign with an arrow on the posts, MakeMeSomethingSpecial are all about quality craftsmanship. These beautiful handmade house signs with pointing arrows are constructed from Superior grade English oak. Each sign is handmade in our Hampshire workshop to order completely from scratch.

The timber is all air-dried so it is perfectly seasoned for outdoor conditions. If you want something that is of superior quality, made with exceptional attention to detail, to a truly stunning flawless finish, you will not be disappointed. These really are the finest and mightiest wooden house signs available on the market.

SIGN SIZES:

We offer two sizes in our standard house sign range. Our Small – 10cm tall and our Large sign – 20cm tall, allowing you to either have your house name engraved on one or two lines depending on how you want your house sign to look. The length of the sign plaque will vary due to the amount of lettering that is required. We will always allow plenty of room either side of your lettering to give your house sign a well-proportioned look. All of our sign plaques are 2.5cm thick and feature carved lettering 5cm tall – Please see the dimensions below:

1 OR 2 POSTS:

You can choose either a single post or two oak posts to have your sign mounted. The sizes of the posts are 5cm square by the length you choose, giving you the option of having your sign close to the ground or plenty of clearance should you need it – to be above a wall or hedge for example.

Choose a post length of – 60cm tall – up to – 1.2 metres tall. These posts sizes are the total height, include what you will need to put into the ground and also the area where the sign is mounted.

Engraving and Colour Options:

Carved lettering is all included in the price. Your engraved lettering can be left plain or paint filled with either Black, Grey or White acrylic paint. Perfect if you want to make your sign stand out more, especially at night.

Finish:

As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each oak sign is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your sign untreated, finished in Superior Danish Oil or our low maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timbers natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot more harder wearing and only requires a top up once a year, however this depend on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top up kits can be ordered over the phone or on our website – see here. 

Assembled or Unassembled:

You can choose to have your free standing house sign fully assembled ready to place or flat packed. Fitting the sign to the post is a very simple process requiring only a couple of bolts. With fully assembled signs, screw fitting holes will be covered over with solid oak plugs.

Placing your Sign:

When it come to place your sign, we recommend you place 20 – 40cm into the ground and fill with concrete for stability and security reasons.

Dimensions & Character quantities:

Small Sign – 1 post: 2.5cm thick x 10cm tall x 50cm wide (1” x 4” x 20”) ~ up to 20 characters

Small Sign – 2 posts: 2.5cm thick x 10cm tall x from 50cm up to 1Metre wide (1” x 4” x 20”) ~ up to 20 characters

Large Sign – 1 post: 2.5cm thick x 20cm tall x 50cm (1” x 8” x 20” up to 39”) ~ up to 30 characters over two rows

Large Sign – 2 posts: 2.5cm thick x 20cm tall x from 50cm up to 1Metre wide (1” x 8” x 20” up to 39”) ~ up to 30 characters over two rows

Post – 5cm x 5cm

Bespoke Sizes:

We can always bespoke make house signs to suit you specific needs. We can make these in any size with any amount of lettering. Please contact us for a quotation.

Estimated Delivery Time:

7-10 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.

Please Note:

All our oak signs are made to order. All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate.

Read more
Engraving Trigger

Personalised Engraving

Across our range

International Delivery

Delivery charges may apply

Live Chat Support

Fast service support

Lets stay in touch

Sign up for our newsletter